Heat Wagon VG600A
$15,979.00
The Heat Wagon VG600A is a powerful indirect fired dual fuel heater(LP/NG) that produces 600,000 BTUs with 7000 cubic feet per minute of heated air. The machine is ideal for larger spaces with high ceilings such as warehouses, large home construction sites, industrial construction sites, etc.
*This product is currently on backorder. Please call 833-401-3569, or email [email protected] to inquire on lead time.
Available on backorder
Description
The Heat Wagon VG600A is a powerful indirect fired dual fuel heater(LP/NG) that produces 600,000 BTUs with 7000 cubic feet per minute of heated air. The machine is ideal for larger spaces with high ceilings such as warehouses, large home construction sites, industrial construction sites, etc.
Heat Wagon VG600A Key Features:
- Switch from vapor propane to natural gas by turning one valve
- Swivel wheels included for easy maneuverability
- High efficiency combustion chamber (90%)
- Assembled and fully tested in Indiana
- Certified for inside or outside operation
- 3 modes of operation:
- Fan only (no heat)
- Heat control using remote thermostat with constant fan ventilation
- Heat control and fan ventilation that cycles on/off with thermostat
- Remote thermostat with 50 ft. cord, flue stack and inlet recirculation adapter included
- Reliable Riello burner
- Low amp draw (12 amps) whisper quiet axial fan (<66 dB)
- Forklift pockets and cable lifting fixtures
- Capable of recirculation operation for improved fuel savings
| L.B. White | Commander 500 |
| BTU/H rating (min/max) | 100-500,000 |
| Heated air output (CFM) | 3,000 |
| Fuel Type | LP/NG |
| Fuel consumption LP gas max (lbs/hr) | 5.51 Gal/Hr |
| Fuel consumption NG gas max (cu ft/hr) | 500 CFH |
| Amps | 11.1 |
| Electric supply (volts/hz/phase/) | 120/60/1 |
| Electrical connection | Nema 5-20 120V, 20A, 3-Wire |
| Diagnostic Indicator | Standard |
| Unit Dimensions | 61.88” l x 32”w x 52.08”h, 525 lbs |
| Single point lifting bale | Standard |
| Ventilation (fan only) | Standard |
| Outlet duct diameter (in) | 16” |
| Inlet duct diameter (in) | 20” |
| Max Duct Length | 100” |
| Link Ready | Standard |
| Third Party Certified | ANSI 283.7/CSA 2.14-2017/CAN US ONLY |
Reviews
There are no reviews yet.