Heat Wagon HVF410HD Diesel Indirect Fired Heater Includes:
- (1) 412,000 BTU Pro Series Diesel Indirect Fired Heater
- (1) Flue stack and cap
Product Features:
- High-Low setting to adjust heater output to handle a wider variety of heating needs
- Fuel consumption rate is approximately 2.91 gallons per hour
- 3250 CFM
- Extra large 57 Gallon Fuel Tank
- Run time of 30 hours continuous on low setting, 20 hours on high setting
- Simple-to-use
- Excellent in cold climates
- Can be thermostatically controlled (optional)
- Runs on standard 120 volt, 15 amp circuit
PLEASE NOTE: Power requirements are (1) 15 amp circuit breaker/standard wall outlet. If ducting, heater requires an optional 20″ single duct adapter, or dual 16″ duct adapter, and high-temperature 16″ or 20″ ducting with corresponding diameters.
An portable diesel indirect heater is a common choice for climate control on construction sites, outdoor events, and other spaces requiring temporary heat or decontamination. The heater can be installed for temporary use indoors or outdoors. If installed indoor, the flue must be vented to the outdoors by an HVAC professional.
The heater is capable of temporarily heating up to 200,000 cubic feet, depending on factors such as building envelope, air handling units for air distribution, and other factors. The heater is equipped with a dual stage burner to conserve fuel, or to use in smaller spaces to prevent rapid short-cycling of the machine. The heater can be recirculated to boost performance in cold weather environments.
The Heat Wagon HVF410HD is indirect-fired, meaning there is no exposed flame or fumes to be concerned about. You can be assured that fresh, clean air will be delivered into the structure without the fear and concern of flames shooting out of the front of the heater. To further ensure safety, all heaters come standard with an on/off thermostat, which means you do not have to manually adjust the gas flow to control the temperature. There are redundant safeties built-in to the heater, including high-temperature limit switch, airflow switch, and flame detection photocell. The body of the heater is made of heavy gauge steel, protecting the components of the heater, and surrounded by steel arms for securing the heater during transport, further safeguarding the heater from accidental damage. The heater has a well-balanced wheel design providing superior maneuverability. The Heat Wagon HVF 410 Diesel Indirect Heater is simple to operate and turned on by the flip of the switch.
Regardless of what kind of portable heater you need, we offer top quality models with all of the accessories needed for optimal performance. We have found products that offer a good balance of both effectiveness, price and are reinforced for high volume use. In addition to heaters, we can help you find the right dehumidifiers, air movers, air scrubbers, and accessories for a variety of needs you may encounter. We have strategic partnerships with manufacturers across the country and can ensure fast delivery of the equipment when and where you need it. To see the product manual, click here
