1,000 Sq. Ft. Electric Bed Bug Heater Package

1,000 Sq. Ft. Electric Bed Bug Heater Package contains:

(1) Eliminator Elite 52k Electric Bed Bug Heater
(1) 50′  8 gauge power cord with a 14-50 (4 prong) stove plug – Powers the 50 amp side of Elite 52k
(1) 50′ 10 gauge power cord with a 14-30 (4 prong) dryer plug – Powers the 30 amp side of the 52k
(1) C4 Electric Bed Bug Heater
(4) 12 gauge pro-grade twist-lock extension cords (2-50′, 2-25′ – cords are red or blue in color depending on product availability) – Powers the C4
(4) X-35AR Axial Air Movers
(1) TF-1100 Low Profile Air Mover
(2) Digital Bluetooth Sensors

The Eliminator Elite 52k is a premier electric heater designed for maximum heat with a minimal footprint. The heater contains 2 independent operating heater circuits, one of which is 50 amps, and the other 30 amps. The 50 amp side is capable of producing 32,736 BTUs of heat, and the 30 amp side is capable of producing 19,641 BTUs. Electric stoves and dryers the preferred power sources for the heater or a portable 17,500 watt generator or greater is required. The heater has a high-velocity fan built into the housing to quickly distribute heated air throughout the treatment area.

The C4 20,000 BTU is a premier 120 volt electric heater designed for maximum heat with a minimal footprint. The heater contains 4 independently operating heater circuits, each of which draws 12 amps. Each circuit adds 5,092 BTUs of heat. The heater has a high-velocity fan built into the housing to quickly distribute heated air throughout the treatment area.

Both heaters have redundant safeties including thermal cutouts, and built-in digital thermostatic controls. The air movers ensure optimal heat penetration throughout your space and the Digital Bluetooth Sensors are used to verify that every square inch of the space has reached your desired temperature.  This 1,000 Sq. Ft. Electric Bed Bug Package also includes all of the necessary power cords for both heaters.

Power requirements: DO NOT use this equipment in any structure built prior to 1978, with outdated power, including aluminum wiring, and push-in or screw-in fuses. Power requirements for the Elite 52k are (1) 30 amp circuit breaker (14-30 dryer receptacle), (1) 50 amp circuit breaker (14-50 stove receptacle) (RECEPTACLE DIAGRAM SHOWN BELOW), and (1) 15 amp circuit breaker-standard wall outlet. Power requirements for the C4 are (4) 15 amp circuit breakers/standard wall outlets. Power requirements for the 5 air movers within this package are (1) 20 amp circuit breaker.

Please note: Electric bed bug heaters generally require one to several hours to reach kill temperatures (120º-140ºF); cold weather, poorly insulated rooms, vaulted ceilings, concrete walls/floors, and inadequate power supply may also impact the time required to achieve kill temperatures as well as the capacity of the heater. Please take exact measurements of your space before ordering this product. If your treatment space is larger than 1000 sq ft, even slightly, this heater may NOT ACHIEVE the above referenced recommended temperature range. Please seek a larger capacity heater from our list on the previous page.

Whether you’re a pest control professional, or a homeowner, you can rest assured this heater will get the job done. Bed bug heat treatments eliminate all stages of the bed bug life cycle, including the eggs. If you have not had success with chemical treatments, or are looking for a faster way to achieve being bed bug free, this heater is the answer. Click to learn more about our other Bed Bug Packages.