2,000 Sq. Ft. Propane Bed Bug Package contains:
(2) 190,000 BTU Propane Bed Bug Heaters
(2) 16” diameter duct adapter
(2) 50′ gas hose with a 3 tank manifold
(2) 25′ long, 16″ diameter high-temperature mylar ducting
(2) High temperature thermostat
(6) SS 4000 Axial Air Movers
(2) SS 1100 Axial Air Movers
(2) HSA Axial Air Movers
(4) Digital Bluetooth Temperature Sensors
- Precise Safety and Temperature Controls
- Compact in Size and Easily Maneuverable (32x15x31, 159 lbs)
- Great Starter Heater for Professionals
- Fully Accessorized
- Multi-rate settings 190,000 BTU or 127,000 BTU
- Single fuel LP
- High CFM
- Easy high limit switch reset
PLEASE NOTE: Cold weather, poorly insulated rooms, vaulted ceilings, and concrete walls/floors may impact the time required to achieve kill temperatures (120º-140ºF) as well as the capacity of the heater. Please take exact measurements of your space before ordering this product. If your treatment space is larger than 2000 sq ft, even slightly, this heater package may NOT ACHIEVE the above referenced recommended temperature range. Please seek a larger capacity heater from our list on the previous page.
The 2,000 Sq. Ft. Propane Bed Bug Package is a perfect starter bundle for professionals. The 190,000 BTU heaters have a 145 degree temperature rise and are ductable up to 75 feet with mylar ducting. Additionally, the heaters can be partially recirculated to boost performance and capacity. This package is designed to treat bed bug infested structures up to 2000 square feet with 8′ ceilings, in a standard 8-10 hour day. The heaters are unique in that they are direct-fired with no exposed flame and extremely low emissions.
You can be assured that fresh, clean air will be delivered into the structure without the fear and concern of flames shooting out of the front of the heater. To further ensure safety, all heaters come standard with a high-temperature on/off thermostat, which means you do not have to manually adjust the gas flow to control the temperature. There are redundant safeties built-in to the heater, including a high-temperature limit switch, airflow switch, and flame detection switch.
The body of the heaters are made of heavy gauge steel, protecting the components of the heater and further safeguarding the heater from accidental damage. The heaters have a 2 wheel design with lift handle, providing easy maneuverability. The heaters are simple to operate and turned on by the flip of the switch.
POWER and FUEL REQUIREMENTS: Each heater requires (1) 15 amp circuit breaker/standard wall outlets and a minimum of (3) 40lb propane cylinders.
Whether you’re a pest control professional, or a homeowner, you can rest assured this heater will get the job done. Bed bug heat treatments eliminate all stages of the bed bug life cycle, including the eggs. If you have not had success with chemical treatments, or are looking for a faster way to achieve being bed bug free, this heater is the answer. Click to learn more about our Commercial Bed Bug Heaters.