190,000 BTU Propane Bed Bug Heater Bundle

Includes:

(1) High Temperature Thermostat
(1) 16″ diameter Duct Adapter
(1) 16″ diameter 25′ length Reinforced Mylar Flex Ducting
(1) 3-Tank Manifold with dual-stage regulator including individual shut-offs and quick connect assembly to heater
(1) 50′ Gas Hose

VERY IMPORTANT: Cold weather, poorly insulated rooms, vaulted ceilings, and concrete walls/floors may impact the time required to achieve kill temperatures (120º-140ºF) as well as the capacity of the heater. Please take exact measurements of your space before ordering this product. If your treatment space is larger than 1000 sq ft, even slightly, this heater may NOT ACHIEVE the above referenced recommended temperature range. Please seek a larger capacity heater from our list on the previous page.  

Product Specifications

Weight: 159
Fuel Type: Propane
Minimum LP Tank Size: 3 x 40 lb
Minimum NG Line Size: N/A
Electrical Rating: 115V / 5.5 amps
Air Volume (CFM): 1600
Gas Inlet Connection: 1/2in D
Gas Inlet Pressure Min LP: – 11in WC
Gas Inlet Pressure Max LP: – 14in WC
Clearance to Combustibles: Horizontal Top 1ft ; Sides 1ft; Back 1ft; Outlet 6ft
Recirculating Ducting: Not Applicable
Duct Length Max: 75 ft with mylar duct
Duct Diameter: 16in
Multiple Ducting Optional: Not Applicable
Wheel Type: Solid Rubber
Thermostat Optional: Included
Item Length (in): 32
Item Width (in): 15
Item Height (in): 31
Warranty: 1 year Limited
Model: HS190SF

190,000 BTU Propane Bed Bug Heater Product Features:

• Simple-to-use
• Precise Safety and Temperature Controls
• Compact in Size and Easily Maneuverable (32x15x31, 159 lbs)
• Great Starter Heater for Professionals
• Fully Accessorized
• Multi-rate settings 190,000 BTU or 125,000 BTU
• Single fuel LP
• High CFM
• Easy high limit switch reset

The 190,000 BTU Propane Bed Bug Heater is a perfect starter heater for professionals. It has a 145 degree temperature rise and is ductable up to 75 feet with mylar ducting. Additionally, the heater can be partially recirculated to boost performance and capacity. It can be used to treat bed bug infested structures up to 1000 square feet with 8′ ceilings, in a standard 8-10 hour day. The heater is unique in that it is direct-fired with no exposed flame and extremely low emissions.

The heater sits outside of the treatment space and delivers fresh, clean air into the structure with the supplied mylar duct (via access through a window, door, etc.). A convenient high-temperature on/off digital thermostat is also supplied with the heater, which prevents the need to manually adjust the gas flow to control the temperature. There are redundant safeties built-in to the heater, including high-temperature limit switch, airflow switch, and flame detection switch.

The body of the heater is made of heavy gauge steel, protecting the components of the heater and further safeguarding the heater from accidental damage. The heater has a 2 wheel design with lift handle, providing easy maneuverability. The heater is simple to operate and turned on by the flip of the switch.

PLEASE NOTE: Power requirements are (1) 15 amp circuit breaker/standard wall outlet. Heater requires a minimum of 3-40lb propane tanks. We recommend the use of a minimum of (5) High Temperature, High Velocity Air Movers to ensure optimal heat penetration throughout your space. 

Bed bug heat treatments eliminate all stages of the bed bug life cycle, including the eggs. If you have not had success with chemical treatments, or are looking for a faster way to achieve being bed bug free, this heater is the answer. Click to learn more about our Commercial Bed Bug Heaters.