Product Uses
Product Specifications
Weight: 159
Fuel Type: Propane
Minimum LP Tank Size: 3 x 40 lb
Minimum NG Line Size: N/A
Electrical Rating: 115V / 5.5 amps
Air Volume (CFM): 1600
Gas Inlet Connection: 1/2in D
Gas Inlet Pressure Min LP: – 11in WC
Gas Inlet Pressure Max LP: – 14in WC
Clearance to Combustibles: Horizontal Top 1ft ; Sides 1ft; Back 1ft; Outlet 6ft
Recirculating Ducting: Not Applicable
Duct Length Max: 75 ft with mylar duct
Duct Diameter: 16in
Multiple Ducting Optional: Not Applicable
Wheel Type: Solid Rubber
Thermostat Optional: Included
Item Length (in): 32
Item Width (in): 15
Item Height (in): 31
Warranty: 1 year Limited
Model: HS190SF
190,000 BTU Propane Bed Bug Heater Product Features:
- Simple-to-use
- Precise Safety and Temperature Controls
- Compact in Size and Easily Maneuverable (32x15x31, 159 lbs)
- Great Starter Heater for Professionals
- Fully Accessorized
- Multi-rate settings 190,000 BTU or 125,000 BTU
- Single fuel LP
- High CFM
- Easy high limit switch reset
Includes:
(1) High Temperature Thermostat
(1) 16″ diameter Duct Adapter
(1) 16″ diameter 25′ length Reinforced Mylar Flex Ducting
(1) 3-Tank Manifold with dual-stage regulator including individual shut-offs and quick connect assembly to heater
(1) 50′ Gas Hose
VERY IMPORTANT: Cold weather, poorly insulated rooms, vaulted ceilings, and concrete walls/floors may impact the time required to achieve kill temperatures (120º-140ºF) as well as the capacity of the heater. Please take exact measurements of your space before ordering this product. If your treatment space is larger than 1000 sq ft, even slightly, this heater may NOT ACHIEVE the above referenced recommended temperature range. Please seek a larger capacity heater from our list on the previous page.
The 190,000 BTU Propane Bed Bug Heater is a perfect starter heater for professionals. It has a 145 degree temperature rise and is ductable up to 75 feet with mylar ducting. Additionally, the heater can be partially recirculated to boost performance and capacity. It can be used to treat bed bug infested structures up to 1000 square feet with 8′ ceilings, in a standard 8-10 hour day. The heater is unique in that it is direct-fired with no exposed flame and extremely low emissions.
You can be assured that fresh, clean air will be delivered into the structure without the fear and concern of flames shooting out of the front of the heater. To further ensure safety, all heaters come standard with a high-temperature on/off thermostat, which means you do not have to manually adjust the gas flow to control the temperature. There are redundant safeties built-in to the heater, including a high-temperature limit switch, airflow switch, and flame detection switch.
The body of the heater is made of heavy gauge steel, protecting the components of the heater and further safeguarding the heater from accidental damage. The heater has a 2 wheel design with lift handle, providing easy maneuverability. The heater is simple to operate and turned on by the flip of the switch.
PLEASE NOTE: Power requirements are (1) 15 amp circuit breaker/standard wall outlet. Heater requires a minimum of 3-40lb propane tanks. We recommend the use of a minimum of (5) High Temperature, High Velocity Air Movers to ensure optimal heat penetration throughout your space.
Bed bug heat treatments eliminate all stages of the bed bug life cycle, including the eggs. If you have not had success with chemical treatments, or are looking for a faster way to achieve being bed bug free, this heater is the answer. Click to learn more about our Commercial Bed Bug Heaters.
190,000 BTU Propane Tent Heater Bundle
Includes:
- (1) 20′ On/Off Thermostat (max temp. 100 degrees)
- (1) 16″ diameter duct adapter
- (1) 16″ diameter 25′ length Reinforced Mylar Flex Ducting
- (1) 1-Tank Manifold with regulator and POL fitting
- (1) 15′ Gas Hose
Product Features:
- Capable of increasing temperatures by 40 degrees in tents up to 1,790 square feet with an average ceiling height of 10 feet
- Fuel consumption rate is approximately 2.08 gallons per hour
- Simple-to-use
- Precise safety and temperature controls
- Compact in size and easily maneuverable
- Fully accessorized
- Multi-rate settings 190,000 BTU or 125,000 BTU
- Single fuel LP
- High CFM
- Easy high limit switch reset
The 190,000 BTU portable tent heater is a single fuel propane heat system with an enclosed flame for safe, low emissions heat. You can be assured that fresh, clean air will be delivered into the structure. To further ensure safety, all heaters come standard with an on/off thermostat, which means you do not have to manually adjust the gas flow to control the temperature. The heater is equipped with a high/low discharge setting, with the high setting producing 190,000 BTUs, and the low setting producing 125,000 BTUs. The low setting is ideal for smaller areas, and/or structures where occupants are sitting near the discharge of the heater. As stated in its name, the heater can be used for tents, but is also a popular choice for residential and commercial construction jobsite heat, garage bays, and much more.
Reviews
There are no reviews yet.