Heat Wagon VG1000 Propane/Natural Gas Heater
$29,899.00
The Heat Wagon VG1000 1 million BTU portable indirect-fired construction heater is a dual-fuel system that can be fueled by both propane and natural gas. Standard equipped with 50′ thermostat.
- Ships via truck freight to commercial dock.
- Additional shipping charges will apply for liftgate, rural, limited access and residential delivery.
- Not returnable – Please double check to confirm this product is correct for your application.
Description
The Heat Wagon VG1000 is a portable indirect-fired construction heater is a dual-fuel system that can be fueled by both propane and natural gas. Key features of the system include:
- 1,000,000 max BTU output
- CSA certified
- Reliable Riello burner
- Remote thermostat
- Skid mounted with fork pockets for transporting
- Long lasting stainless steel combustion chamber
- High static centrifugal blower
- 100% dry heat, clean of combustion by-products
- 4,075 CFM
- 200 degree temperature rise
- Recirculation capability
- 20″ duct adapter
The Heat Wagon VG1000 Heater is ideal for larger spaces because it produces such a high amount of BTUs and air volume. In regards to space heating, the high CFM output will help produce enough heated air to overcome cold air gaps and leaks, know as the “infiltration load”. The 1,000,000 BTUs produced by the system will produce a 40 degree F temperature rise in spaces as large as 300,000 cubic feet with an average building envelope.
The Heat Wagon VG1000 can be fueled using propane or natural gas, and Thermal Flow Technologies can provide you with proper fuel connections such as threaded connections, gas hoses, and regulators with tank connections. In addition to its dual-fuel capability, heater has built-in recirculation capability. The recirculation capability gives the user higher efficiency by returning warmer air from the space to the inlet of the heater. This in turn increases the temperature discharge and lowers fuel consumption.
Another use for this 1,000,000 BTU indirect fired heater is heat drying of flooded spaces. Not only will the heater help raise the temperature of the structure, it will help evaporate large amounts of moisture, while introducing fresh dry air to help evacuate the evaporated moisture. The system can used as a standalone drying system, or in concert with dehumidification systems.
If you would like to review the product manual for more in-depth information, click here for a direct-link to manufacturer’s page.
Additional information
| Weight | 1300 lbs |
|---|---|
| Dimensions | 120 × 32 × 54 in |
Specifications
| Temperature Rise | 200 degrees |
| Input | 1,000,000 BTU/hr |
| Fuel |
|
| Fuel Consumption | 7.2 GPH |
| Electrical | 240V, 30 Amp |
| Thermostat | On/Off w/ 15′ cord |
| Weight | 1,300 lbs. |
| Ductable | up to 200′ |
| Dimensions | 120″ L 31.5″ W 54″ H |
