L.B. White Foreman 500 Propane/NG Indirect-Fired Heater
$7,899.00
The L.B. White Foreman 500 Propane/NG indirect-fired heater is a portable indirect-fired heater that can operate using propane or natural gas. The machine produces 500,000 BTUs of fume-free heat with 3,457 cubic feet a minute air volume. Shipping costs are based on shipping to a commercial location with a dock. Additional charges may apply for liftgate, rural, or limited access shipments. For a custom quote, please email [email protected] or call 833-401-3569 ext. 2.
Description
The L.B. White Foreman 500 Propane/NG indirect-fired heater is a portable indirect-fired heater that can operate using propane or natural gas. The system comes Link Capable, which is LB White’s proprietary real-time heater monitoring system(requires subscription to be used). Key features of the L.B. White Foreman 500DF Heater include:
- 500,000 BTUs of heat
- 3,457 CFM
- Ductable to 75’ on dual 12” ports
- Thermostatically Controlled(thermostat sold separately)
- CSA safety certified
- Sturdy frame with integral wheels for transport
- Sealed motor for outdoor operation in all types of weather
- Portable
- Optional forklift pockets
- Two-Year Warranty
Additional Specs:
FOREMAN® | 500 DF |
---|---|
BTU/HR | 500,000 |
Certified for use in US & CAN | Yes |
Dual Fuel (LP Gas/NG) | Yes |
Minimum LP Gas Tank Size (gal) | 500 |
Power Requirements (volts/hz/phase) | 120/60/1 |
Size L x W x H (in.) | 94 x 32 x 53 |
Required Accessories (Order Separately) | Vent Stack, Rain Cap, Regulator, Hose |
Optional Accessories (Order Separately) | Thermostat, Stacking Kit |
Air Distribution Accessories (Order Separately) | (2) 12″ x 12″ Duct Kit + 12″ End Diffusers OR Duct Adapter + 16″ Duct Kit |
*Note- Heater does not include ducting/This heater requires (2)12″ diameter sections of ducting. There is also an optional thermostat that can be supplied with the machine, and also an option duct adapter that converts from dual 12″ diameter to a single 16″ adapter.
The L.B. White Foreman 500 Propane/NG Indirect-Fired Heater can be used in applications such as:
Climate Control- Temporary heating of warehouse spaces where higher amounts of BTUs are required, or larger events to heat tents and other non-permanent structures. The heater can raise the temperature of the space by 40 degrees F in a 200,000 cubic feet space(i.e. 14,300 sq. ft. with 14′ ceilings) in moderately insulated structures. For a more precise heat load requirement for your particular application, consult our heating guide, or contact our office at 833-401-3569 or by email at [email protected].
Disaster Restoration- Heat drying to increase and promote rapid evaporation of wet structures to aid in drying the structure to return to pre-loss condition. This system can be used as an open drying system, or a partial recirculation, with the flue pipe being piped to the outside of the structure.
-Many other process heating applications such bed bug treatments, lumber drying, etc.
To see the product’s portability, click here.