fbpx
40 kW 3-Phase Electric Construction Heater

HS 200,000 BTU Indirect-Fired Diesel Heater Bundle

$3,099.00

The HS 200,000 Heater Bundle Includes the Following:

200,000 BTU Heater, 32′ analog thermostat, 25′ section of flexible high-temp ducting, duct adapter, and flue stack. Capable of Heating Tents up to 1,700 square feet with 10′ ceiling height, and insulated buildings up to 6,500 square feet with 8′ ceilings.

Subtotal:

Add-ons total:

Total:

Quantity:

The HS 200,000 Heater Bundle Includes the Following:

200,000 BTU Heater

-32′ analog thermostat

-25′ section of flexible high-temp ducting

-duct adapter

-flue stack

An indirect-fired diesel heater is a common choice for climate control on construction sites, outdoor events, and other spaces requiring temporary heat. The heater can be installed for temporary use indoors or outdoors. If installed indoor, the flue must be vented to the outdoors by an HVAC professional. Building Heating: The heater is capable of temporarily heating up to 6,500 square feet structures with standard 8′ ceiling height; depending on factors such as building envelope, air handling units for air distribution, and other factors. Tent Heating: Since tents have lower insulation values, capacity is reduced. This heater is capable of heating up to 1,700 square feet tents with 10′ ceiling heights, raising the temperature 40 degrees above outside temps.  The HS 200,000 BTU heater will cycle itself off and on to maintain the desired temperature with the thermostat included with the bundle. The heater is ductable up to 60′. Indirect-fired heat means all products of combustion are expelled out of a flue stack, while fresh clean air runs across the heated chamber, and is delivered to the space. Unlike direct-fired “barrel” type systems, there are no exposed flames or fumes.

PLEASE NOTE: Power requirements are (1) 15 amp circuit breaker/standard wall outlet. Heater requires diesel fuel, sold separately. The heater must be connected to a Generator if run remotely. Inverters cannot withstand the initial Amp draw required to start the machine.

This All-in-One Heater bundle supplies your space with each of the necessary components to quickly set up your heater to make your space comfortable for occupants. Our HS 200,000 BTU heater offers contractors, restaurants, and event spaces the advantage of big heat on wheels with this Indirect Fired Heater.  This Indirect heater will supply your team with ducted, clean, heated air to dry paint, cure concrete, or restore entire homes from water damage. HS 200,000 BTU heaters are heavily used in larger construction projects and water damage restoration because of its intense Thermal Rise and powerful Cubic Feet per Minute (CFM) fan output.

Additional information

Weight185 lbs
Dimensions53 × 23 × 39 in

Specifications

More Information
Weight185
Fuel TypeKerosene, Diesel 1# or 2#, Fuel Oil, Jet A fuel
Tank Capacity (Gal)17
IgnitionContinuous
Electrical Rating120v, 60 HZ, 13 Amp
Air Volume (CFM)1060
Heated Fuel FilterStandard
Heated NozzleNo
Clearance to Combustibles: Horizontal6 ft
AdapterF105111 Single (14″) / F105117 Dual
Recirculating DuctingOptional
Duct Length Max50 ft
Duct Diameter14 in
Multiple Ducting OptionalOptional
Wheel TypeSolid Rubber
Thermostat OptionalF105108 Analog (33′) / F105106 Digital (33′)
Item Length (in)52.55
Item Width (in)22.63
Item Height (in)39.37
Item Weight (lb)185
Warranty1 Year Limited
ModelHSP200ID
40 kW 3-Phase Electric Construction Heater

Professional Memberships

KPAC1411-2 PORTABLE AIR CONDITIONER 1.1 ton

KPAC1411-2 PORTABLE AIR CONDITIONER 1.1 ton

KPAC1411-2 PORTABLE AIR CONDITIONER 1.1 ton

US chamber logo
X