fbpx
200,000 Btu Flagro Pro Series Diesel Indirect-Fired Heater w/ 42 gal tank
330,000 BTU Flagro Propane Heater

Veloci Blaze 300 Mobile Indirect Heater Package

$4,200.00

Fully Accessorized 300,000 Btu Indirect-Fired Diesel Blaze Heater Package for commercial use in structural drying. In approximately a 6,325 sqft space, the water removal rate is 275lbs of water per hour at full saturation.

PLEASE NOTE: **Free Shipping to the contiguous U.S.** Surcharges may apply based on your location and dock availability. Please inquire about Quantity Discounts or if you need to purchase the heater by itself without accessories.

Quantity:

Blaze 300 Mobile Indirect Heater Package Includes:

(1) Blaze 300 Heater
(1) Chimney w/ Rain Cap
(1) Thermostat
(2) sections of 16″ X 20′ Duct
(1) 16″ One-Way Duct Adaptor
(1) Maintenance Kit (Nozzle, Filter, & Photo-eye)
(1) set of 4 Lifting Brackets

Features of the Blaze 300 Include:

  • 300,000 BTU Output
  • In ~6,325 sqft, water removal rate is 275lbs/hr at full saturation.
  • 2.17 gallons per hour fuel consumption rate
  • Pre heated Fuel Filter installed
  • 13 hour run time
  • 126°F Thermal Rise
  • 2,530 Cubic Feet per Minute (CFM)
  • Ductable One-Way up to 80 feet
  • Ductable Two-Way up to 40 feet each direction
  • Powder Coated Stainless Steel Fuel Tank
  • 27.7 Gallon Fuel Tank
  • 275 lbs Dry Weight
  • 10″ Pneumatic Tires
  • CSA Approved
  • 88% Combustion Efficiency (12% loss to stack)
  • Zero PPM CO Emissions in Heated Environment
  • Operating Amp Draw at 11.80 A – Startup Spike approximately 15 A
  • Front Support Plate
  • Hour Counter
  • Fuel Gauge

The Blaze 300 Heater typically sits outside of the space and introduces 2530 CFM of heated airflow to the wet structure. The heater promotes rapid evaporation, and the moisture-laden air is continuously evacuated outside through strategic openings in the space. Water removal rates far exceed that of typical portable dehumidifiers. The Blaze 300 Heater is widely-used by Disaster Restoration professionals. The heaters are designed with proprietary custom features such as front-lift handle and structural support brackets. These features strengthen the heater for the rigors of repeated transportation and use. The Blaze 300 Heater will cycle itself off and on to maintain the desired temperature. A return air duct can be used to bring heated air back from the space to gain increased efficiency. The heater has a 4-pass burner chamber, ensuring maximum efficiency and is ductable up to 80′. Indirect-fired heat means all products of combustion are expelled out of a flue stack, while fresh clean air runs across the heated chamber, and is delivered to the space. Unlike direct-fired “barrel” type systems, there are no exposed flames or fumes.

PLEASE NOTE: Power requirements are (1) 15 amp circuit breaker/standard wall outlet. Heater requires diesel fuel, sold separately. The heater must be connected to a Generator if run remotely. Inverters cannot withstand the initial Amp draw required to start the machine.

This All-in-One Heater package supplies your team with each of the necessary components to quickly set up your heater, safely transport it, and perform general maintenance to ensure reliable performance. Our Blaze heaters offer contractors and restoration franchisees the advantage of Big Heat on wheels with this Premium Indirect Fired Heater. The innovation of the Italian Blaze series Forced Air Heaters lies in the four pass chamber heating design to capture as much heat as possible and exchanging it with the blown air to heat the environment. This Indirect heater will supply your team with ducted, clean, heated air to dry paint, cure concrete, or restore entire homes from water damage. Blaze heaters are heavily used in larger construction projects and water damage restoration because of its intense Thermal Rise and powerful Cubic Feet per Minute (CFM) fan output.

Veloci’s Blaze 300 Heater offers contractors and restoration franchisees the advantage of Big Heat on wheels with this Premium Indirect Fired Heater. The innovation of the Italian Blaze 300 Forced Air Heater lies in the four pass chamber heating design to capture as much heat as possible and exchanging it with the blown air to heat the environment. This Indirect heater will supply your team with ducted, clean, heated air to dry paint, cure concrete, or restore entire homes from water damage. The Blaze 300 is heavily used in larger construction projects and water damage restoration because of its elevated 126°F Thermal Rise and powerful 2,530 CFM fan output.

Places you will see the Blaze 300 might include Commercial Construction Sites, Residential Construction Sites, Garage Heating, Air Plane Hangars, City Infrastructure remodels, Pest Remediation, temporary Space Heating, Curing Concrete, Agriculture Temp Heat, Water Restoration, Drying Drywall/Paint, Rental Tent Heating, and many, many others. The Blaze 300 has proven itself in a multitude of industries across four continents where it is present in Construction, Public events, and Agriculture to ensure that work never stops. The value of working through inclement conditions in comfort far outweighs the cost of these units as they last for many years with their Italian patented design.

Why Indirect Fired Heating?

Great question! There are three major forms of heating to consider when purchasing a Mobile Heater:

Forced Air Indirect-Fired Heating is essentially a mobile furnace. Veloci’s Blaze line is an Indirect Forced Air heater manufactured in Italy. These units have a separate internal chamber where combustion by-product is isolated and expelled through a chimney which means that the hot air forced from the outlet is 100% clean heated air. Veloci’s Blaze 300 heater has a patented four chamber design that captures more heat for the forced air to exchange. This, in-turn, requires a larger fan which allows for an increased output of Cubic Feet of air per Minute (CFM). Compare the Blaze series CFM to any box store heater’s CFM and you will see Blaze units move clean heat at an exponentially higher rate. There is no use in having a high BTU unit if you cannot effectively move the heat into the desired environment. When purchasing an Indirect Fired Heater, consider the space you are looking to heat in cubic feet by measuring the length, width, and ceiling height of the space to be heated. For Veloci’s Blaze 200 and Blaze 300, dual ducting is an option for increased heating ability by pumping clean heated air into a second location of a structure to bring it up to the desired temperature, faster. Note, the Thermal Rise listed for Veloci Indirect-Fired heaters is meant to be added to the ambient temperature. Example: A 126°F thermal rise on the Blaze 300 should be added to the ambient (intake) temperature. This means that if the outside temperature is 50°F, the output temperature, once the air is heated and exits the heater would 176°F.

Radiant Heating, also known as Infrared, operates on the concept of Heat Transfer as compared to Heat Exchange (blowing heaters). Veloci’s Fire and Flame heaters are Radiant mobile units manufactured in Italy. These heaters have an internal burner that heats up an external face plate to 1400°F which transfers heat to any objects in front of it in a conical shape. Radiant units should technically not be used as space heaters since they do not heat air and, instead, heat objects. However, the Fire and Flame heaters have an air pocket that requires forced air. This unique technology yields a hybrid heater that effectively heats space and objects simultaneously. While the forced air output is only approximately 250 CFM, circulating air from heated objects, including the heater’s face, is the most efficient practice when fast heat is needed.

Forced Air Direct-Fired Heating has 100% efficiency but typically emits 30-40 PPM of Carbon Monoxide into the environment being heated. Direct-Fired heaters are the cheap ones typically found at hardware and big box stores. They quickly cause watery eyes, scratchy eyes, headaches and fatigue as the occupants of the environment are inhaling exhaust fumes. Furthermore, these units can leave an exhaust smell and purple haze when in a closed environment such as completing drywall or paint projects. Direct-Fired heaters should never be used in a closed environment or for livestock since the repercussions can be catastrophic. This is true for any Direct-Fired heater whether its fuel is Diesel or N/LP.

Approved Fuels by Ambient Temperature:

  • Kerosene or Jet Fuel at -4° F or below
  • Diesel Winter Blend between 32°F to -4°F
  • Diesel #2 or Off-Road Diesel for 32°F or above

**No Bio-Diesel**

 

Our professional team has made all things related to heat treatment and airflow our expertise, and we are proud to provide a wide variety of portable heaters. Our staff has completed thousands of treatments, and personally use this equipment in the field. Rest assured, you’re not just purchasing equipment, you’re getting the support of experienced professionals in the industry! Regardless of what kind of portable heater you need, we offer top quality models with all of the accessories needed for optimal performance. We have found products that offer a good balance of both effectiveness, price and are reinforced for high volume use. In addition to heaters, we can help you find the right dehumidifiers, air movers, air scrubbers, and accessories for whatever drying environment you encounter. We have strategic partnerships with manufacturers across the country and can ensure fast delivery of disaster and water restoration equipment when and where you need it. Click to see our full line of Disaster Restoration Equipment and here to learn more about Heat Drying.

Additional information

Weight 275 lbs

Product Specifications

Download Spec Sheet

Reviews

There are no reviews yet.

Be the first to review “Veloci Blaze 300 Mobile Indirect Heater Package”

Your email address will not be published. Required fields are marked *

You may also like…

200,000 Btu Flagro Pro Series Diesel Indirect-Fired Heater w/ 42 gal tank
330,000 BTU Flagro Propane Heater

Professional Memberships

Veloci Blaze 300 Mobile Indirect Heater Package

Veloci Blaze 300 Mobile Indirect Heater Package

Veloci Blaze 300 Mobile Indirect Heater Package

US chamber logo
X