- (1) 200,000 Btu Pro Series Propane Indirect-Fired Heater
- (1) Flue stack
- (1) Remote thermostat
- Capable of increasing temperatures by 40 degrees in tents up to 1,700 square feet with an average ceiling height of 10 feet
- Fuel consumption rate is approximately 2.19 gallons per hour
- Precise safety and temperature controls
- Slim design for easy site mobility and transportation
- Thermostatically controlled
- Ductable up to 150′
- 200,000 BTU Input / 185,000 BTU Output
- Optional 1/2″ 50′ Gas Hose, Dual Stage Regulator & 3 Tank Manifold with individual shut offs and POL fittings
PLEASE NOTE: Power requirements are (1) 15 amp circuit breaker/standard wall outlet. Heater requires a minimum of a 100lb cylinder of propane fuel for proper function; two cylinders are recommended, especially for cold environments. We recommend the purchase of (1) 12″ High Temperature Ducts sold in 25′ sections.
An indirect-fired propane heater is a common choice for climate control on construction sites, outdoor events, and other spaces requiring temporary heat. The heater can be installed for temporary use indoors or outdoors. If installed indoor, the flue must be vented to the outdoors by an HVAC professional. Additionally, the heater can be recirculated to boost performance in cold weather environments. It is capable of temporarily heating buildings up to 6,500 square feet with standard 8′ ceiling height, depending on factors such as building envelope, air handling units for air distribution, and other factors.
The 200,000 Btu Pro Series is indirect-fired, meaning there is no exposed flame or fumes to be concerned about. You can be assured that fresh, clean air will be delivered into the structure without the fear and concern of flames shooting out of the front of the heater. To further ensure safety, all heaters come standard with an on/off thermostat, which means you do not have to manually adjust the gas flow to control the temperature. The 200,000 Btu Pro Series control box has a supply voltage display to avoid faulty power sources. There are redundant safeties built-in to the heater, including high-temperature limit switch, airflow switch, and flame detection photocell. The body of the heater is made of heavy gauge steel, protecting the components of the heater, and surrounded by steel arms for securing the heater during transport, further safeguarding the heater from accidental damage. The heater has a 4 wheel design providing superior maneuverability.
Our professional team has made all things related to heat treatment and airflow our expertise, and we are proud to provide a wide variety of portable heaters. Regardless of what kind of portable heater you need, we offer top quality models with all of the accessories needed for optimal performance. We have found products that offer a good balance of both effectiveness, price and are reinforced for high volume use. In addition to heaters, we can help you find the right dehumidifiers, air movers, air scrubbers, and accessories for a variety of needs you may encounter. We have strategic partnerships with manufacturers across the country and can ensure fast delivery of the equipment when and where you need it. Click to see our full line of Climate Control products.