1500 Sq. Ft. Indirect-Fired Diesel and Electric Combo Bed Bug Heater Package
2000 Sq. Ft. Indirect-Fired Diesel Bed Bug Heater Package

1500 Sq. Ft. Indirect-Fired Propane and Electric Combo Bed Bug Heater Package

$8,499.00

Bed Bug treatment package combining gas and electric heater technologies. Treats up to 1500 sqft of Occupied Spaces.

PLEASE NOTE: Additional shipping charges may apply based on your location and dock availability.

Quantity:

The 1500 Sq. Ft. Indirect-Fired Propane and Electric Combo Bed Bug Package contains:

(1) 200,000 BTU Pro-Series Indirect-Fired Propane Bed Bug Heater
(1) Eliminator Elite 20,000 Btu Electric Bed Bug Heater
(5) Elite SS 1.8 Amp Axial Air Movers
(4) SS-1100 Low Profile Air Movers
(1) 3 Tank Manifold & 50’ Gas Hose Assembly, Fully Accessorized
(1) Flue Stack
(1) 50’ High Temperature Thermostat
(1) 25′ long, 12″ diameter high-temperature ducting
(4) 12 gauge, 25’ extension cords
(2) Bluetooth Digital Sensors

200,000 Btu Pro Series Propane Indirect-Fired Heater Product Features:

  • Simple-to-use
  • Precise Safety and Temperature Controls
  • Slim design for easy site mobility and transportation
  • Thermostatically Controlled
  • Includes a Flue Stack & High Temperature Thermostat

Eliminator Elite 20,000 Btu Electric Bed Bug Heater Product Features:

  • Simple-to-use
  • Plugs into standard wall outlets
  • Thermostatically controlled
  • Can achieve 140 degrees F

VERY IMPORTANT: Cold weather, poorly insulated rooms, vaulted ceilings, and concrete walls/floors may impact the time required to achieve kill temperatures (120º-140ºF) as well as the capacity of the heater. Please take exact measurements of your space before ordering this product. If your treatment space is larger than 1500 sq ft, even slightly, this heater may NOT ACHIEVE the above referenced recommended temperature range. Please seek a larger capacity heater from our list on the previous page.

Boasting a 160 degree temperature rise, the 200,000 Btu Pro Series delivers the maximum amount of heat, which is crucial for efficient heating of a structure. The heater is equipped with backward incline blowers, which allow for ducting up to 150 feet with extremely quiet delivery of air into the structure. The 200,000 Btu Pro Series comes with a single 12” diameter discharge. The heater is able to be recirculated to boost performance in cold weather environments. It can be used to treat bed bug infested structures up to 1200 square feet in a standard 8-10 hour day. The 200,000 Btu Pro Series is indirect-fired, meaning there is no exposed flame or fumes to be concerned about. You can be assured that fresh, clean air will be delivered into the structure without the fear and concern of flames shooting out of the front of the heater. To further ensure safety, all heaters come standard with a high-temperature on/off thermostat, which means you do not have to manually adjust the gas flow to control the temperature. The 200,000 Btu Pro Series control box has a supply voltage display to avoid faulty power sources. There are redundant safeties built-in to the heater, including high-temperature limit switch, airflow switch, and flame detection photocell. The body of the heater is made of heavy gauge steel, protecting the components of the heater, and surrounded by steel arms for securing the heater during transport, further safeguarding the heater from accidental damage. The heater has a 4 wheel design providing superior maneuverability. The 200,000 Btu Pro Series Propane Indirect-Fired Heater is simple to operate and turned on by the flip of the switch.

The Eliminator Elite 20,000 Btu is a premier 120 volt electric heater designed for maximum heat with a minimal footprint. The heater contains 4 independently operating heater circuits, each of which draws 12 amps. Each circuit adds 5,092 Btus of heat. The heater has a high-velocity fan built into the housing to quickly distribute heated air throughout the treatment area. All heaters have redundant safeties including thermal cutouts, and built-in digital thermostatic controls. Its superior molding allows for stacking with the Elite SS fan, or the Eliminator Elite 52k heater. This package includes the needed ducting along with the Elite SS Amp Axial Air Movers and Low Profile Air Movers needed to ensure optimal heat penetration throughout your space. The Bluetooth Digital Sensors are used to verify that every square inch of the space has reached your desired temperature. This package also includes all of the extension cords needed.

PLEASE NOTE: Power requirements are (5) 15 amp circuit breakers and (1) 20 amp circuit breaker. The Pro Series heater also requires a minimum of a 100lb cylinder of propane fuel for proper function, sold separately. Two cylinders are recommended, especially for cold environments.

Whether you’re a pest control professional, or a homeowner, you can rest assured this package will get the job done. Bed bug heat treatments eliminate all stages of the bed bug life cycle, including the eggs. If you have not had success with chemical treatments, or are looking for a faster way to achieve being bed bug free, this package is the answer. In addition, our staff has completed thousands of treatments, and personally use this equipment in the field. Rest assured, you’re not just purchasing equipment, you’re getting the support of experienced professionals in the industry! Click to learn more about our Bed Bug Packages.

Product Specifications

Download Gas Heater Spec Sheet

Download Electric Heater Spec Sheet

Reviews

There are no reviews yet.

Be the first to review “1500 Sq. Ft. Indirect-Fired Propane and Electric Combo Bed Bug Heater Package”

Your email address will not be published. Required fields are marked *

You may also like…

1500 Sq. Ft. Indirect-Fired Diesel and Electric Combo Bed Bug Heater Package
2000 Sq. Ft. Indirect-Fired Diesel Bed Bug Heater Package

Professional Memberships

Eliminator Elite 52k Electric Bed Bug Heater

Eliminator Elite 52k Electric Bed Bug Heater

Eliminator Elite 52k Electric Bed Bug Heater

US chamber logo
X