1000 Sq. Ft. Indirect-Fired Diesel Bed Bug Heater Package
1200 Sq. Ft. Electric Bed Bug Heater Package

1000 Sq. Ft. Indirect-Fired Propane Bed Bug Heater Package


Indirect-Fired Propane Gas Heater Treatment Package with all products needed to treat up to 1000 sqft of occupied spaces.

PLEASE NOTE: Additional shipping charges may apply based on your location and dock availability.

Available on backorder


Add-ons total:



1000 Sq. Ft. Indirect-Fired Propane Bed Bug Package contains:

(1) 200,000 BTU Pro-Series Indirect-Fired Diesel Bed Bug Heater
(1) Flue Stack
(1) 50’ High Temperature Thermostat
(1) 25′ long, 12″ diameter high-temperature ducting
(1) 3/4″ 50′ Gas Hose, Dual Stage Regulator & 3 Tank Manifold with individual shut offs and POL fittings
(4) SS 1.8 Amp Axial Air Movers 
(4) SS-1100 Low Profile Air Movers
(2) Digital Bluetooth Sensors

200,000 Btu Pro Series Propane Indirect-Fired Heater Product Features:

  • Simple-to-use
  • Precise Safety and Temperature Controls
  • Slim design for easy site mobility and transportation
  • Thermostatically Controlled
  • Includes a Flue Stack & High Temperature Thermostat

VERY IMPORTANT: Cold weather, poorly insulated rooms, vaulted ceilings, and concrete walls/floors may impact the time required to achieve kill temperatures (120º-140ºF) as well as the capacity of the heater. Please take exact measurements of your space before ordering this product. If your treatment space is larger than 1000 sq ft, even slightly, this heater may NOT ACHIEVE the above referenced recommended temperature range. Please seek a larger capacity heater from our list on the previous page.

Boasting a 160 degree temperature rise, the 200,000 Btu Pro Series delivers the maximum amount of heat, which is crucial for efficient heating of a structure. The heater is equipped with backward incline blowers, which allow for ducting up to 150 feet with extremely quiet delivery of air into the structure. The 200,000 Btu Pro Series comes with a single 12” diameter discharge. The heater is able to be recirculated to boost performance in cold weather environments. It can be used to treat bed bug infested structures up to 1000 square feet with 8′ ceilings, in a standard 8-10 hour day. The 200,000 Btu Pro Series is indirect-fired, meaning there is no exposed flame or fumes to be concerned about. You can be assured that fresh, clean air will be delivered into the structure without the fear and concern of flames shooting out of the front of the heater. To further ensure safety, all heaters come standard with a high-temperature on/off thermostat, which means you do not have to manually adjust the gas flow to control the temperature. The 200,000 Btu Pro Series control box has a supply voltage display to avoid faulty power sources. There are redundant safeties built-in to the heater, including high-temperature limit switch, airflow switch, and flame detection photocell. The body of the heater is made of heavy gauge steel, protecting the components of the heater, and surrounded by steel arms for securing the heater during transport, further safeguarding the heater from accidental damage. The heater has a 4 wheel design providing superior maneuverability. The 200,000 Btu Pro Series Propane Indirect-Fired Heater is simple to operate and turned on by the flip of the switch. The package includes the needed ducting along with the Elite SS Axial Air Movers and Low Profile Air Movers needed to ensure optimal heat penetration throughout your space. The Digital Bluetooth Sensors are used to verify that every square inch of the space has reached your desired temperature.

PLEASE NOTE: Power requirements are (2) 15 amp circuit breakers/standard wall outlets. The Pro Series heater also requires a minimum of a 100lb cylinder of propane fuel for proper function, sold separately. Two cylinders are recommended, especially for cold environments.

Whether you’re a pest control professional, or a homeowner, you can rest assured this package will get the job done. Bed bug heat treatments eliminate all stages of the bed bug life cycle, including the eggs. If you have not had success with chemical treatments, or are looking for a faster way to achieve being bed bug free, this package is the answer. In addition, our staff has completed thousands of treatments, and personally use this equipment in the field. Rest assured, you’re not just purchasing equipment, you’re getting the support of experienced professionals in the industry! Click to learn more about our Bed Bug Packages.

Additional information

Weight 300 lbs
Dimensions 52 × 27 × 48 in

Product Specifications

Download Spec Sheet


There are no reviews yet.

Be the first to review “1000 Sq. Ft. Indirect-Fired Propane Bed Bug Heater Package”

Your email address will not be published. Required fields are marked *

You may also like…

1000 Sq. Ft. Indirect-Fired Diesel Bed Bug Heater Package
1200 Sq. Ft. Electric Bed Bug Heater Package

Professional Memberships

GMS Power Distribution Kit

GMS Power Distribution Kit

GMS Power Distribution Kit

US chamber logo